EVALUASI NILAI PENYUSUTAN ALAT BERAT DENGAN METODE GARIS LURUS PADA JALAN BYPASS BANDARA INTERNATIONAL LOMBOK (BIL) MANDALIKA 2
Evaluation Of The Depreciation Value Of Heavy Equipment With The Straight Line Method In Bypass Road Lombok International Airport (BIL) Mandalika 2
DOI:
https://doi.org/10.59896/gara.v19i4.422Keywords:
Heavy equipment, Depreciation Value, Straight Line MethodAbstract
Procurement of heavy equipment requires precise analysis to avoid financial losses. Losses are usually caused by the continued use of equipment condition and value have decreased. Ignorance of the decreasing value of the equipment becomes an obstacle when submitting a tender when the latest equipment price information is needed. Heavy equipment or all goods with economic value will have a decrease in economic value. This decrease in is called depreciation. Calculating the depreciation value is very important for future calculations to avoid losses and to determine the value of the equipment after use or within a certain period. This study analyzes equipment after the construction of the Mandalika 2 Bypass Road project. In this depreciation value analysis, the method used is the straight-line method using qualitative and quantitative data. The results of this study are shown in numerical form the depreciation that occurs will be higher if the equipment is in poor condition and will produce a lower value if the equipment is in good condition. The cost of equipment after a project is highly dependent on the depreciation value of the equipment. The higher the depreciation, the lower the price. If the depreciation value is calculated based on operational costs, it will be even higher.
References
Chaplin Erwin J, Samsunan, & R. Aulia. (2022). Analisa Biaya Operasional Alat Berat Pada Pekerjaan Timbunan. JITU (Jurnal Ilmiah Teknik Unida), 3(1), 42–43.
Ekky, S., Zaenal & S. Widayati. (2017). Prosiding Teknik Pertambangan Kajian Biaya Kepemilikan (Owning Cost) dan Biaya Operasi (Operating Cost) pada Peralatan Penambangan Batuan Andesit di PT Panghegar Mitra Abadi, Blok Gunung Gadung, Kampung Cikuya. Prosiding Teknik Pertambangan, 3(2), 670.
Febrianti, D. & Zakia. (2019). Analisis Durasi dan Perhitungan Biaya Penyusutan (Depresiasi) Alat Berat Excavator. Jurnal Teknik Sipil Universitas Syiah Kuala, 8(1), 11.
Febrianti, D., Zakia, Z., & Mawardi, E. (2021). Analisis Biaya Operasional Alat Berat pada Pekerjaan Timbunan. Tameh: Journal of Civil Engineering, 10(1), 33–41. https://doi.org/10.37598/tameh.v10i1.131
Kementrian PUPR. (2016). ANALISIS HARGA SATUAN PEKERJAAN (AHSP) BIDANG CIPTA KARYA.
Kholil Ahmad. (2012). Alat Berat (1st ed.). PT. Remaja Rosdakarya.
Kusrin. (2008). Pemindahan Tanah Mekanis & Alat Berat. Semarang Press.
PT. United Traactors Tbk. (2013). Manajemen Alat-Alat Berat.
Rostiyanti F. S. (2008). Alat Berat Untuk Proyek Konstruksi (kedua). PT. Rineka Cipta.
Sondakh, F. & Pangemanan S. (2019). Alat Berat dan PTM (1st ed.). Polimdo Press. www.polimdo.ac.id
Tauro, S. P., Tjakra, J., & Malingkas, G. Y. (2013). ANALISIS BIAYA PENGGUNAAN ALAT BERAT PADA PEKERJAAN TANAH (Studi Kasus Perencanaan Bandar Udara Lokasi Desa Pusungi Kec. Ampana Tete Kab. Tojo Una-una, Sulawesi Tengah). Jurnal Sipil Statik, 1(12), 764–773.
Wulandari, N. W., DAS, Amsori Muhammad., & Raudhati, E. (2022). Studi Kelayakan Investasi Operasional Alat Berat PT. Permata Agung Dewata Di Kota Jambi. Jurnal Talenta Sipil, 5(1), 9.
Downloads
Published
How to Cite
Issue
Section
License
Copyright (c) 2025 Hasyim Hasyim, Iao Suwati Sideman, Rohani Rohani, Salehudin Salehudin, I Gede Putu Yogi Pratama

This work is licensed under a Creative Commons Attribution-ShareAlike 4.0 International License.











